BREC's Stainless Steel Rabbit Cages are constructed with an open design rod upper half which allows maximum visibility of the animals and excellent lighting and ventilation of the interior of the cage. The lower half of the cage sides and the door front are formed of stainless steel sheet which terminates at the bottom with wide baffles providing effective control and deflection of urine and excreta into the waste pans. Cages can be suspended in stainless steel racks in various configurations (3, 6, or 9 cages each), or used as free standing units. During cage washing, with the excreta pans removed, the open design allows the cage washer spray direct access to all surfaces of the cage enabling the highest efficiency of cage washing and sanitation. Cages are available in these sizes of floor area: 3 sq. ft.; 4 sq. ft; and 5 sq. ft.

Models Shown LC-200-S, LC-210-S,
LC-220-S, and LC-230-S.

Stainless steel 3 square feet for up to 9lbs. total body weight complete with F-200-S feeder, quart watering unit, removable floor and stainless steel excreta pan. This cage is designed for maximum animal comfort. The top third of the walls and the ceilings are rod panel to allow maximum air flow and light to the animals. The removable floors are constructed of 20 gauge x 1/4" rounded edge flat wire space and 11/16" on center to allow for efficient removal of urine and feces and to afford the animal comfortable footing. The cage can be used as a stand alone unit or in racks. Casters are either copper-nickel-chrome plated or stainless steel with brakes, grease fittings and gray or orange non-marking tires.

Stainless steel 4 square feet for up to 12 lbs. total body weight complete with F-200-S feeder, quart watering unit, removable floor and stainless steel excreta pan.

Stainless steel 5 square feet for over 12 lbs. total body weight complete with F-200-S feeder, quart watering unit, removable floor and stainless steel excreta pan.

Stainless steel 5 square feet for over 12 lbs. total body weight complete with F-200-S feeder, quart watering unit, removable floor and stainless steel excreta pan.

Stainless steel complete with three (3) LC-220-S rabbit cages and mounted on 5" chrome plated casters with brakes, grease fittings and gray non-marking tires.

Stainless steel complete with six (6) LC-220-S rabbit cages and mounted on 5" chrome plated casters with brakes, grease fittings and gray non-marking tires.

Stainless steel complete with three (3) LC-230-S rabbit cages and mounted on 5" chrome plated casters with brakes, grease fittings and gray non-marking tires.

Stainless steel complete with six (6) LC-230-S rabbit cages and mounted on 5" chrome plated casters with brakes, grease fittings and gray non-marking tires.

Stainless steel complete with three (3) LC-200-S rabbit cages and mounted on 5" chrome plated casters with brakes, grease fittings and gray non-marking tires.

Stainless steel complete with six (6) LC-200-S rabbit cages and mounted on 5" chrome plated casters with brakes, grease fittings and gray non-marking tires.

Stainless steel complete with nine (9) LC-200-S rabbit cages and mounted on 5" chrome plated casters with brakes, grease fittings and gray non-marking tires.

Stainless steel complete with three (3) LC-210-S rabbit cages and mounted on 5" chrome plated casters with brakes, grease fittings and gray non-marking tires.

Stainless steel complete with six (6) LC-210-S rabbit cages and mounted on 5" chrome plated casters with brakes, grease fittings and gray non-marking tires.

Stainless steel complete with nine (9) LC-210-S rabbit cages and mounted on 5" chrome plated casters with brakes, grease fittings and gray non-marking tires.

Stainless steel complete with six (6) compartments and three (3) removable dividers (becoming a 3 compartment unit with dividers removed increasing it to 8 sq. ft immediately), F-200-S feeders, quart watering units, removable floors and stainless steel excreta pans. When no litter is being housed, the rack can be used as conventional 4 sq. ft. housing unit. Unit is mounted on 5" chrome plated casters with brakes, grease fittings, and gray non-marking tires.

Stainless steel complete with eight (8) compartments and four (4) removable dividers (becoming a 4 compartment unit with dividers removed increasing it to 8 sq. ft immediately), F-200-S feeders, quart watering units, removable floors and stainless steel excreta pans. When no litter is being housed, the rack can be used as conventional 4 sq. ft. housing unit. Unit is mounted on 5" chrome plated casters with brakes, grease fittings, and gray non-marking tires.

Stainless steel complete with six (6) cage (LC 260 P) plastic rabbit housing unit. Cages precision molded from "noryl" which provides the privacy, quiet, and warmth often missing in a stainless steel cage. Excreta pan is also "Noryl" which doubles as a ceiling in our rack. The innovative feature of our rack is that we have constructed the cage tracks of high density polyethylene. These tracks are pre-formed to hold the cages with positive pressure and have additional quieting effect on the entire facility. Unit is mounted on casters of either copper-nickel-chrome plated or stainless steel with brakes, grease fittings and gray or orange non-marking tires.

Cage body made of precision molded "Nory" which adds privacy, quiet and warmth. The top also acts as an excrement pan, or ceiling when used in our rack (R 260 23 S)

Aluminum complete with unit mounted on 5' chrome plated casters with brakes, grease fittings, and gray non-marking tires.

Aluminum complete with unit mounted on 5" chrome plated casters with brakes, grease fittings, and gray non-marking tires.